MULTI-MOUNT WINCH - POLARIS/GRAVELY

Constructed of 3/16" steel Metal bead blasted before they are powder coated for the best possible finish prep and durability Complete installation instructions included All mounting hardware included Roller fairlead and winch not included 100% made in USA Kit includes the following: Front Upper 2" Receiver #4504-0236 2" Receiver Winch Mount #4505-1072 20" Quick Connect that gets wired to your winch leads #4505-0962 48" Quick Connect that goes from your winch contactor to the front of your Ranger #4505-0963 120" Quick Connect that goes from your winch contactor to the rear of your Ranger #4505-0961 Standard 5/8" Hitch Pin Designed to work with the following winches: KFI: ST17 / S2000 / A2000 / A2500-R2 / A3000 / U45-R2 / U45w-R2 / SE25 / SE35 / SE45-R2 / SE45w-R2 / AM-25 / AM-35 / AS-25 / AS-35 / AS-50 / AS-50w WARN: A2000 / A2500 / U2500 / 1.5ci / 2.5ci / 2.5ce / 3.0ci / 3.0ce / VRX 25 / VRX 25-S / VRX 35 / VRX 35-S / VRX 45 / VRX 45-S WARN: AXON 35 / AXON 35-S / AXON 45RC / AXON 45 / AXON 45-S / AXON 55 / AXON 55-S WARN: RT15 / RT25 / RT30 / XT15 / XT25 / XT30 WARN: Vantage 2000-3000lbs / Provantage 2500-3500lbs / Vantage 4000lbs / Provantage 4500lbs WARN: RT40 / XT40 RAMSEY: ATV2500 / ATV3000 SUPERWINCH: Terra25 / Terra35 / Terra 45 / A3500 / LT2000 / LT2500 / LT3000 / LT4000ATV Traveller: 1078088 / 1078302 requires roller fairlead with a 4.875" bolt pattern Possibly many others with 4-Hole 3.00" x 4.875" bolt pattern with rollers that are 4.875" bolt pattern, or 4-Hole WIDE 3.00" x 6.60" bolt pattern with rollers that are 6.600" or 6.000" bolt pattern, or 2-Hole 3.10" with rollers that are 4.875" bolt pattern XGEAR: X3000 / X4000 4-Hole Standard (3.00" x 4.875" bolt pattern) KEEPER CORP. TRAKKER: KT2500 / KT3000 / KT2500C / KT3000C / KT4000 / KT4000C VENOM: 2000 / 2500 / 3000 / 3500 / 4000 / 4500 / 5000 Hardcore Series with 3.00" x 4.875" or 3.00" x 6.600" bolt pattern mount-up Traveller: 1078311 MILE MARKER: PE2.5 / PE 3.5 / VMX2.5 / PE2000 / PE3000 / PE2500 / PE3500 MASTER LOCK: 1500lbs #2955AT requires roller fairlead with a 4.875" bolt pattern CYCLE COUNTRY: Work Power 1500 and 2500 / Powermax 2500 and 3500 BADLAND: Apex 5500 Wide BADLAND, CHAMPION: 2-Hole Winches, Standard Winches, Wide Winches CHAMPION: 14001 and 14061 SMITTYBILT: XRC 2.0 requires roller fairlead with a 4.875" bolt pattern SMITTYBILT: XRC 3.0 / XRC 4.0 This kit will allow you to mount your winch on the front or the rear using the stock rear 2" receiver and the supplied front 2" receiver