POLARIS RANGER/BOBCAT WINCH SHRD MNT

It is recommended to also purchase the Polaris wire 3-pin harness part #2120-1247. Constructed of 3/16" grade 50 steel Metal bead blasted and powder-coated for best possible finish prep and durability Very easy to install Complete installation instructions included Mounts winch tucked back behind front bumper Roller fairlead and winch not included. 100% made in the USA Designed to work with the following winches: KFI: ST17 / A2000 / A2500-R2 / A3000 / U45-R2 / U45w-R2 / SE25 / SE35 / SE45-R2 / SE45w-R2 KFI: AM-25 / AM-35 / AS-25 / AS-35 / AS-50x / AS-50wx WARN: VRX 25 / VRX 25-S / VRX 35 / VRX 35-S / VRX 45 / VRX 45-S WARN: A2000 / A2500 / U2500 / 1.5ci / 2.5ci / 2.5ce / 3.0ci / 3.0ce / 3.0s WARN: RT15 / RT25 / RT30 / XT15 / XT25 / XT30 / WARN: RT40 / XT40 WARN: Vantage 2000-4000 lb WARN: ProVantage 2500-4500 lb RAMSEY: ATV2500 / ATV3000 SUPERWINCH: Terra25 / Terra35 / Terra45 / Terra 2500 (SR) / Terra 3500 (SR) / Terra 4500 (SR) / A3500 / LT2000 / UT3000 / LT2500 / LT3000 / LT4000 (SR) / LT4000ATV / LT4000UTV MILE MARKER: PE2.5 / PE 3.5 / VMX2.5 / PE2000 / PE3000 / PE2500 / PE3500 CYCLE COUNTRY: Work Power 1500 and 2500 / PowerMax 2500 and 3500 BADLAND: 2-hole, standard, and wide winches CHAMPION: 2-hole, ATV 4-hole, UTV-4 hole, and wide winches KEEPER CORP. TRAKKER: KT2500 / KT3000 / KT2500C / KT3000C / KT4000 / KT4000C KEEPER CORP. TRAKKER: KT2000 (requires roller fairlead with a 4.875" bolt pattern) SMITTYBILT: XRC 2.0 (requires roller fairlead with a 4.875" bolt pattern) SMITTYBILT: XRC 3.0 / XRC 4.0 XGEAR: X3000 / X4000 4-hole standard (3.00" x 4.875" bolt pattern) VENOM: 2000 / 2500 / 3000 / 3500 / 4000 / 4500 / 5000 (Hardcore Series) with 3.00" x 4.875" or 3.00" x 6.600" bolt pattern mount-up Traveller: 1078311 Traveller: 1078088 / 1087302 (require roller fairlead with a 4.875" bolt pattern) QUADBOSS: RP25 / RP35 Possibly many others with 4-hole (3.00" x 4.875" bolt pattern with rollers that are 4.875" bolt pattern) or 4-hole wide (3.00" x 6.60" bolt pattern with rollers that are 6.600" or 6.000" bolt pattern) or 2-hole (3.10" with rollers that are 4.875" bolt pattern)